Good results...

So here's some CNC'd aluminum. I used a 4 flute 1/8" end mill at mid-low speed to cut this. I ran the cutter very gently through the work, using slow feed rates. I think the results are really nice! Have a look: IMG_20150110_212733

I did this for my fiancé's brother Greg of GK Sound for his birthday. He does sound and lighting for everything from fashion shows to live bands to awards ceremonies. Pretty much, if it needs sound, lights, drape, stage, led's or pretty much anything else, Greg will do it.

www.GKsound.ca (the site is currently under construction)